Are you curious about where to find the best fiberglass veil manufacturers in China? With the booming demand for high-quality fiberglass products, knowing the top factories can make all the difference for your business. By comparing these leading manufacturers, you can ensure you’re choosing a partner that meets your quality standards and production needs. Imagine the peace of mind that comes with selecting a reliable supplier who can deliver exceptional products on time. Ready to discover the top contenders in the industry? Let’s dive in and explore the best fiberglass veil factories that China has to offer!

Fiberglass Veil For Foam Glass – Nanjing EFG Co.,Ltd

Product Details: Fibreglass Veil for foam glass is designed as a barrier on steel belts to carry mineral powder during foam glass production. It features a non-woven structure with an even surface, low porosity, and good tensile strength in different directions.

Technical Parameters:
– Loss on ignition: 21±3% (Tested value: 22.3%)
– Area Weight: 50±3 g/m2 (Tested value: 49.5 g/m2)
– Tensile Strength MD: 250±20 N/5cm (Tested value: 258 N/5cm)
– Tensile Strength CD: 150±20 N/5cm (Tested value: 165 N/5cm)
– Air Permeability (@200Pa): ≤ 5500 L/m2/s (Tested value: 5409 L/m2/s)
– Thickness (@500Pa): 0.48±0.03 (Tested value: 0.49)
– Moisture Content: ≤ 0.2% (Tested value: 0.11%)

Application Scenarios:
– Used as a barrier on steel belts in foam glass production.
– Can be customized for specific unit weight, tensile strength, roll width, and ro…

Pros:
– Good tensile strength and stiffness.
– Easy absorption by foam glass.

Cons:
– Limited to specific production processes.
– Requires careful storage conditions.

Bêste priis op Fiberglass Surfacing Veil, 30G / M2, 250m / Roll

Product Details: Fiberglass Surfacing Veil, 30G / M2, 250m / Roll, used as substrates for surface and inner layers of walls and ceilings, waterproof roofing materials.

Technical Parameters:
– Area Weight: 30g/m2
– Tensile Strength MD: ≥170 N/5cm

Application Scenarios:
– Commercial roofing
– Wall covering

Pros:
– High tensile strength and corrosion resistance
– Environmentally friendly product

Cons:
– Potential regional price fluctuations
– Limited information on specific performance metrics

High Quality 2022 China New Design Fiberglass Cfm450

Product Details: 2022 China New Design Fiberglass Cfm450 – Fiberglass Veil / Tissue in 25g to 50g/m2

Technical Parameters:
– Area weight: 25g, 30g, 40g, 50g
– Loss on Ignition: 6.0+/-1 to 7.2+/-1%
– Moisture content: ≤0.2%
– Tensile strength: ≥20 to ≥40 N/50MM

Application Scenarios:
– FRP Panel production
– Pultrusion applications

Pros:
– Good quality and reasonable price
– Wide range of applications

Cons:
– Limited roll widths (50mm, 200mm, 1000mm)
– Specific tensile strength requirements

Manufactur standard Glass Fiber Surfacing Mat, Wet Tissue Veil

Product Details: Manufactur standard Glass Fiber Surfacing Mat, Wet Tissue Veil. GRECHO Non-woven veils provide higher performance standards and flexibility for ceiling manufacturers.

Technical Parameters:
– Tensile Strength: 120N/70N, 120N/80N, 130N/90N
– Density: 120g, 140g, 180g
– Flame-retarded Rating: B1
– Packing Size: 1.22x410M
– Color: Black / White / Custom

Application Scenarios:
– Acoustic ceiling tiles
– Baffles, clouds, and other specialty applications

Pros:
– Improves ceiling aesthetics with a smooth surface and brightness
– Flame and smoke protection with flame-retardant technology
– Wipeable and mold resistant, ideal for hospitals and education centers

Cons:
– Limited information on specific performance metrics
– Potentially higher cost compared to traditional materials

China Fiberglass Woven Roving Suppliers factory and …

Product Details: Special Design for 100g-800g E Glass Woven Roving Glassfiber Fabric Cloth Mat Fiberglass Veil for Boat Marine Building FRP GRP Panel

Technical Parameters:
– Warp and weft roving aligned in a parallel and flat manner
– Good moldability and durability

Application Scenarios:
– Petrochemical: pipes, tanks, liquefied petroleum gas cylinders
– Transportation: cars, buses, tankers, tanks, liquefied gas cylinders

Pros:
– High specific tensile strength compared to steel wire
– Good transparency and high strength of composite products

Cons:
– Requires careful handling during production
– Potential for high shipping costs due to weight

Veil China Manufacturer – Hitex Composites

Product Details: Veil products including Carbon Fiber Veil, Fiberglass Roofing Tissue, Polyester Surfacing Veil, and more.

Technical Parameters:
– Variety of materials available
– Different applications for each type

Application Scenarios:
– Construction
– Automotive

Pros:
– High strength-to-weight ratio
– Versatile applications

Cons:
– Potentially high cost
– Requires specialized handling

China fiberglass surface veil Manufacturers Factory Suppliers

Product Details: Fiberglass Surface Veil is used in the surface layers of FRP products, available in winding S-SM series and hand lay-up S-HM series.

Technical Parameters:
– High tensile strength
– Good wet-through and wet-out characteristics

Application Scenarios:
– Used in pipe and tank winding
– Used in the outer layer of GRP products

Pros:
– Excellent mechanical properties
– High temperature resistance

Cons:
– Limited information on specific drawbacks
– Potential for high cost in some applications

Best Price on Fiberglass Surface Veil – 3D FRP Panel with resin

Product Details: Best Price on Fiberglass Surface Veil – 3D FRP Panel with resin – Beihai Fiberglass

Technical Parameters:
– Pillar Height: 4.0 to 20.0 mm
– Flatwise Tensile Strength: 0.9 to 7.5 MPa

Application Scenarios:
– Construction and building materials
– Composite manufacturing

Pros:
– Lightweight but high strength
– Great resistance against delamination

Cons:
– Performance may vary based on resin used
– Specific design requirements may limit versatility

E-Glass EMKP Surface Veil Stitched Combo Mat Manufacturers

Product Details: E-Glass EMKP Surface Veil Stitched Combo Mat is a composite material combining a layer of surface veil with various fiberglass fabrics, multiaxials, and chopped roving, suitable for multiple forming processes.

Technical Parameters:
– Total weight: 370-1495 gsm
– Base Fabrics: EMK, LT, WR, CF

Application Scenarios:
– Pultrusion
– Resin transfer molding

Pros:
– No chemical adhesive, soft and easy to set
– Improves product appearance and increases resin content on the surface

Cons:
– Potential for breakage and wrinkling if not formed properly
– Requires careful handling during production

Fiberglass – China Jushi Co., Ltd.

Product Details: High Modulus Glass Fiber (E8)

Technical Parameters:
– Higher modulus, 17% higher than E6 glass, 7% higher than E7 glass
– Higher softening point, 32℃ higher than E6 glass, 9℃ higher than E7 glass

Application Scenarios:
– Building & Construction
– Infrastructure
– Electrical & Electronic
– Chemical Corrosion Resistance
– Transportation
– Energy-saving and Environmental Protection
– Sports and Leisure

Pros:
– Higher modulus compared to traditional E glass
– Clean production using boron-free and fluorine-free raw materials

Cons:
– Information not specified
– Information not specified

Related Video

Comparison Table

Company	Product Details	Pros	Cons	Website
Fiberglass Veil For Foam Glass – Nanjing EFG Co.,Ltd	Fibreglass Veil for foam glass is designed as a barrier on steel belts to carry mineral powder during foam glass production. It features a non-woven s…	– Good tensile strength and stiffness. – Easy absorption by foam glass.	– Limited to specific production processes. – Requires careful storage conditions.	www.nanjingefg.com
Bêste priis op Fiberglass Surfacing Veil, 30G / M2, 250m / Roll	Fiberglass Surfacing Veil, 30G / M2, 250m / Roll, used as substrates for surface and inner layers of walls and ceilings, waterproof roofing materials.	– High tensile strength and corrosion resistance – Environmentally friendly product	– Potential regional price fluctuations – Limited information on specific performance metrics	www.grechofiberglass.com
High Quality 2022 China New Design Fiberglass Cfm450	2022 China New Design Fiberglass Cfm450 – Fiberglass Veil / Tissue in 25g to 50g/m2	– Good quality and reasonable price – Wide range of applications	– Limited roll widths (50mm, 200mm, 1000mm) – Specific tensile strength requirements	www.matex-frp.com
Manufactur standard Glass Fiber Surfacing Mat, Wet Tissue Veil	Manufactur standard Glass Fiber Surfacing Mat, Wet Tissue Veil. GRECHO Non-woven veils provide higher performance standards and flexibility for ceilin…	– Improves ceiling aesthetics with a smooth surface and brightness – Flame and smoke protection with flame-retardant technology – Wipeable and mold re…	– Limited information on specific performance metrics – Potentially higher cost compared to traditional materials	www.grechofiberglass.com
China Fiberglass Woven Roving Suppliers factory and …	Special Design for 100g-800g E Glass Woven Roving Glassfiber Fabric Cloth Mat Fiberglass Veil for Boat Marine Building FRP GRP Panel	– High specific tensile strength compared to steel wire – Good transparency and high strength of composite products	– Requires careful handling during production – Potential for high shipping costs due to weight	www.frp-cqdj.com
Veil China Manufacturer – Hitex Composites	Veil products including Carbon Fiber Veil, Fiberglass Roofing Tissue, Polyester Surfacing Veil, and more.	– High strength-to-weight ratio – Versatile applications	– Potentially high cost – Requires specialized handling	www.hitex-composite.com
China fiberglass surface veil Manufacturers Factory Suppliers	Fiberglass Surface Veil is used in the surface layers of FRP products, available in winding S-SM series and hand lay-up S-HM series.	– Excellent mechanical properties – High temperature resistance	– Limited information on specific drawbacks – Potential for high cost in some applications	www.fiberglass-factory.com
Best Price on Fiberglass Surface Veil – 3D FRP Panel with resin	Best Price on Fiberglass Surface Veil – 3D FRP Panel with resin – Beihai Fiberglass	– Lightweight but high strength – Great resistance against delamination	– Performance may vary based on resin used – Specific design requirements may limit versatility	www.fiberglassfiber.com
E-Glass EMKP Surface Veil Stitched Combo Mat Manufacturers	E-Glass EMKP Surface Veil Stitched Combo Mat is a composite material combining a layer of surface veil with various fiberglass fabrics, multiaxials, a…	– No chemical adhesive, soft and easy to set – Improves product appearance and increases resin content on the surface	– Potential for breakage and wrinkling if not formed properly – Requires careful handling during production	www.wtfiberglass.com
Fiberglass – China Jushi Co., Ltd.	High Modulus Glass Fiber (E8)	– Higher modulus compared to traditional E glass – Clean production using boron-free and fluorine-free raw materials	– Information not specified – Information not specified	www.jushi.com

Frequently Asked Questions (FAQs)

What is fiberglass veil and what is it used for?

Fiberglass veil is a thin, non-woven material made from glass fibers. It is commonly used in construction, automotive, and marine applications for reinforcement, insulation, and surface finishing. Its lightweight and durable nature makes it ideal for enhancing the strength and durability of various products.

Why choose a fiberglass veil factory in China?

China is known for its advanced manufacturing capabilities and cost-effective production. By choosing a fiberglass veil factory in China, you can benefit from high-quality materials at competitive prices, along with a wide range of options to meet your specific needs.

How do I ensure quality when sourcing fiberglass veil?

To ensure quality, look for factories with certifications like ISO 9001. Request samples to evaluate the material’s performance and durability. Additionally, consider visiting the factory or working with a sourcing agent to oversee the production process and quality control.

What are the typical lead times for fiberglass veil production?

Lead times can vary based on order size and factory capacity, but generally, you can expect production to take anywhere from 2 to 6 weeks. It’s always a good idea to discuss timelines with the factory to ensure they meet your project deadlines.

Can I customize fiberglass veil products?

Yes, many fiberglass veil factories in China offer customization options. You can specify dimensions, weight, and even the type of glass fibers used. Be sure to communicate your requirements clearly to ensure the final product meets your expectations.